AOT7S65/aob7s65/aotf7s65 650v 7a a aa a mos tm power transistor general description product summary v ds @ t j,max 750v i dm 30a r ds(on),max 0.65 w q g,typ 9.2nc e oss @ 400v 2 m j 100% uis tested 100% r g tested for halogen free add "l" suffix to part number: AOT7S65l & aob7s65l & aotf7s65l symbol v ds v gs i dm i ar e ar e as mosfet dv/dt ruggedness peak diode recovery dv/dt h t j , t stg t l symbol r q ja r q cs r q jc * drain current limited by maximum junction temperatur e. 4.7 aotf7s65l 27 0.2 100 20 -55 to 150 300 104 aotf7s65l 650 30 30 1.7 43 86 5 va w/ o c 7* mj 35 5* 7* 5* gate-source voltage single pulsed avalanche energy g w p d repetitive avalanche energy c a mj avalanche current c v/ns t c =100c pulsed drain current c continuous drain current 7 t c =25c i d the AOT7S65 & aob7s65 & aotf7s65 have been fabricated using the advanced a mos tm high voltage process that is designed to deliver high levels of performance and robustness in switching applications. by providing low r ds(on) , q g and e oss along with guaranteed avalanche capability these parts can be adopted quickly into new and existing offline power supp ly designs. v units parameter absolute maximum ratings t a =25c unless otherwise noted AOT7S65/aob7s65 aotf7s65 drain-source voltage parameter units maximum junction-to-case 1.2 3.6 c/w maximum case-to-sink a maximum junction-to-ambient a,d c/w 0.5 -- c/w aotf7s65 65 65 AOT7S65/aob7s65 65 -- 0.8 thermal characteristics c c 0.3 t c =25c power dissipation b dv/dt maximum lead temperature for soldering purpose, 1/8" from case for 5 seconds j junction and storage temperature range derate above 25 o c g ds to-263 d 2 pak g d s g d s d s g top view to-220f to-220 AOT7S65 aob7s65 aotf7s65 rev1: mar 2012 www.aosmd.com page 1 of 7
AOT7S65/aob7s65/aotf7s65 symbol min typ max units 650 - - 700 750 - - - 1 - 10 - i gss gate-body leakage current - - 100 n a v gs(th) gate threshold voltage 2.6 3.3 4 v - 0.54 0.65 w - 1.48 1.64 w v sd - 0.82 - v i s maximum body-diode continuous current - - 7 a i sm - - 30 a c iss - 434 - pf c oss - 30 - pf c o(er) - 23 - pf c o(tr) - 80 - pf c rss - 1 - pf r g - 17.5 - w q g - 9.2 - nc q gs - 2.5 - nc q gd - 2.7 - nc t d(on) - 21 - ns t r - 14 - ns t d(off) - 55 - ns t f - 15 - ns t rr - 224 - ns i rm - 19 - a q rr - 2.8 - m c this product has been designed and qualified for th e consumer market. applications or uses as critical components in life support devices or systems are n ot authorized. aos does not assume any liability ar ising out of such applications or uses of its products. aos reserves the right to improve product design, functions and reliability without notice. v gs =0v, v ds =0 to 480v, f=1mhz effective output capacitance, time related i i s =3.5a,v gs =0v, t j =25c input capacitance v gs =0v, v ds =100v, f=1mhz output capacitance turn-off delaytime gate drain charge effective output capacitance, energy related h diode forward voltage body diode reverse recovery time v gs =0v, v ds =100v, f=1mhz gate resistance i f =3.5a,di/dt=100a/ m s,v ds =400v reverse transfer capacitance v gs =10v, v ds =400v, i d =3.5a, r g =25 w turn-off fall time total gate charge v gs =10v, v ds =480v, i d =3.5a gate source charge electrical characteristics (t j =25c unless otherwise noted) static parameters parameter conditions body diode reverse recovery charge i f =3.5a,di/dt=100a/ m s,v ds =400v maximum body-diode pulsed current c turn-on delaytime dynamic parameters turn-on rise time peak reverse recovery current i f =3.5a,di/dt=100a/ m s,v ds =400v v gs =0v, v ds =0v, f=1mhz switching parameters r ds(on) static drain-source on-resistance i dss v gs =10v, i d =3.5a, t j =150c v gs =10v, i d =3.5a, t j =25c v ds =5v,i d =250 m a m a v ds =0v, v gs =30v bv dss v drain-source breakdown voltage i d =250 a, v gs =0v, t j =25c v ds =650v, v gs =0v v ds =520v, t j =150c zero gate voltage drain current i d =250 a, v gs =0v, t j =150c a. the value of r q ja is measured with the device in a still air environ ment with t a =25c. b. the power dissipation p d is based on t j(max) =150c, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is use d. c. repetitive rating, pulse width limited by juncti on temperature t j(max) =150c, ratings are based on low frequency and duty cycles to keep initial t j =25c. d. the r q ja is the sum of the thermal impedance from junction to case r q jc and case to ambient. e. the static characteristics in figures 1 to 6 are obtained using <300 m s pulses, duty cycle 0.5% max. f. these curves are based on the junction-to-case t hermal impedance which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of t j(max) =150c. the soa curve provides a single pulse ratin g. g. l=60mh, i as =1.7a, v dd =150v, starting t j =25c h. c o(er) is a fixed capacitance that gives the same stored energy as c oss while v ds is rising from 0 to 80% v (br)dss. i. c o(tr) is a fixed capacitance that gives the same chargin g time as c oss while v ds is rising from 0 to 80% v (br)dss. j. wavesoldering only allowed at leads. rev1: mar 2012 www.aosmd.com page 2 of 7
AOT7S65/aob7s65/aotf7s65 typical electrical and thermal characteristics 0 2 4 6 8 10 12 14 0 5 10 15 20 v ds (volts) figure 1: on-region characteristics@25c i d (a) v gs =4.5v 6v 10v 7v 0.01 0.1 1 10 100 2 4 6 8 10 v gs (volts) figure 3: transfer characteristics i d (a) -55c v ds =20v 25c 125c 0.0 0.3 0.6 0.9 1.2 1.5 0 3 6 9 12 15 i d (a) figure 4: on-resistance vs. drain current and gate voltage r ds(on) ( w ww w ) v gs =10v 0 0.5 1 1.5 2 2.5 3 -100 -50 0 50 100 150 200 temperature (c) figure 5: on-resistance vs. junction temperature normalized on-resistance v gs =10v i d =3.5a 0.8 0.9 1 1.1 1.2 -100 -50 0 50 100 150 200 t j ( o c) figure 6: break down vs. junction temperature bv dss (normalized) 0 2 4 6 8 10 12 0 5 10 15 20 v ds (volts) figure 2: on-region characteristics@125c i d (a) v gs =4.5v 5v 10v 6v 5v 5.5v 5.5v 7v rev1: mar 2012 www.aosmd.com page 3 of 7
AOT7S65/aob7s65/aotf7s65 typical electrical and thermal characteristics 0 3 6 9 12 15 0 3 6 9 12 15 q g (nc) figure 8: gate-charge characteristics v gs (volts) v ds =480v i d =3.5a 0 1 10 100 1000 10000 0 100 200 300 400 500 600 v ds (volts) figure 9: capacitance characteristics capacitance (pf) c iss c oss c rss 0.01 0.1 1 10 100 1 10 100 1000 v ds (volts) i d (amps) figure 11: maximum forward biased safe operating area for aot(b)7s65 (note f) 10 m s 10ms 1ms dc r ds(on) limited t j(max) =150c t c =25c 100 m s 0.01 0.1 1 10 100 1 10 100 1000 v ds (volts) i d (amps) figure 12: maximum forward biased safe operating area for aotf7s65 (note f) 10 m s 10ms 1ms 0.1s dc r ds(on) limited t j(max) =150c t c =25c 100 m s 1s 1.0e-05 1.0e-04 1.0e-03 1.0e-02 1.0e-01 1.0e+00 1.0e+01 1.0e+02 0.0 0.2 0.4 0.6 0.8 1.0 v sd (volts) figure 7: body-diode characteristics (note e) i s (a) 25c 125c 0 1 2 3 4 5 0 100 200 300 400 500 600 v ds (volts) figure 10: coss stored energy eoss(uj) e oss rev1: mar 2012 www.aosmd.com page 4 of 7
AOT7S65/aob7s65/aotf7s65 typical electrical and thermal characteristics 0 2 4 6 8 0 25 50 75 100 125 150 t case (c) figure 15: current de-rating (note b) current rating i d (a) 0 20 40 60 80 100 25 50 75 100 125 150 175 t case (c) figure 14: avalanche energy e as (mj) 0.01 0.1 1 10 100 1 10 100 1000 v ds (volts) i d (amps) figure 13: maximum forward biased safe operating area for aotf7s65l (note f) 10 m s 10ms 1ms 0.1s dc r ds(on) limited t j(max) =150c t c =25c 100 m s 1s rev1: mar 2012 www.aosmd.com page 5 of 7
AOT7S65/aob7s65/aotf7s65 typical electrical and thermal characteristics 0.001 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 pulse width (s) figure 16: normalized maximum transient thermal imp edance for aot(b)7s65 (note f) z q qq q jc normalized transient thermal resistance d=t on /t t j,pk =t c +p dm .z q jc .r q jc r q jc =1.2c/w in descending order d=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse single pulse 0.001 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 pulse width (s) figure 17: normalized maximum transient thermal imp edance for aotf7s65 (note f) z q qq q jc normalized transient thermal resistance d=t on /t t j,pk =t c +p dm .z q jc .r q jc r q jc =3.6c/w in descending order d=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse single pulse 0.001 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 pulse width (s) figure 18: normalized maximum transient thermal imp edance for aotf7s65l (note f) z q qq q jc normalized transient thermal resistance d=t on /t t j,pk =t c +p dm .z q jc .r q jc r q jc =4.7c/w in descending order d=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse single pulse t on t p d t on t p d t on t p d rev1: mar 2012 www.aosmd.com page 6 of 7
AOT7S65/aob7s65/aotf7s65 - + vdc ig vds dut - + vdc vgs vgs 10v qg qgs qgd charge gate charge test circuit & waveform - + vdc dut vdd vgs vds vgs rl rg vgs vds 10% 90% resistive switching test circuit & waveforms t t r d(on) t on t d(off) t f t off vdd vgs id vgs rg dut - + vdc l vgs vds id vgs bv i unclamped inductive switching (uis) test circuit & waveforms ig vgs - + vdc dut l vds vgs vds isd isd diode recovery tes t circuit & waveforms vds - vds + i f ar dss 2 e = 1/2 li di/dt i rm rr vdd vdd q = - idt t rr ar ar rev1: mar 2012 www.aosmd.com page 7 of 7
|
